Scanning Reference Stations - Leica GPS1200 Series Technical Reference Manual

24.9
Description
Access step-by-step
Config...\Interfaces... - Controlling Devices

Scanning Reference Stations

CONFIGURE Scan Reference Station provides information about the reference stations,
with specific types of devices attached, for example a radio, from which real-time corrections
are being received. This can also be useful for finding out if anyone else in the area is using
a particular radio channel.
Step Description
1. Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2. In CONFIGURE Interfaces highlight an interface which has an
appropriate device attached.
3. CTRL (F4) to access CONFIGURE RS232 Connection or
CONFIGURE Radio Channel.
4. SCAN (F5) to access CONFIGURE Scan Reference Station.
GPS1200
Refer to
chapter
23
607