Survey - Hidden Points
Measure a hidden point
with Double Distance
step-by-step
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
A hidden point measurement device can be attached to the receiver
such that the measurements are automatically transferred to the
receiver.
1.
Refer to "46.2 Accessing Hidden Point Measurement" to access
HIDDEN PT Hidden Point Measurement.
SHIFT CONF (F2) to configure hidden point measurements.
2.
HIDDEN PT Hidden Point Measurement
<Method: Double Distance>
<Point A:> The point ID of the current position. This is the first known
point for the calculation of the hidden point.
Select a point stored in the job.
SURVY (F5) when <Point A:> is highlighted. To manually occupy the
first known point for the calculation of the hidden point.
To manually type in coordinates for a known point open the choicelist
when <Point A:> is highlighted. Press NEW (F2) to create a new
point.
3.
HIDDEN PT Hidden Point Measurement
<Horiz Dist:> The horizontal distance from <Point A:> to the hidden
point.
GPS1200
1234
Refer to
chapter
23.1.7
22.7
44.3
9.3.2