Leica GPS1200 Series Technical Reference Manual page 837

COGO
Step Description
Upon pressing STORE (F1) in COGO Inverse, the result from
the COGO inverse calculation is copied to the field which was
highlighted when INV (F2) was pressed.
For <Write Logfile: Yes> in COGO Configuration, Logfile
page the result of the COGO inverse calculation is written to
the logfile.
The value for the offset can be selected from previous COGO inverse
calculations.
LAST (F4) when <Offset:> is highlighted. To recall previous results
from COGO inverse calculations.
Upon pressing CONT (F1) in COGO Last Inverse Calculations, the
selected result is copied to the field.
The value for the offset can be mathematically modified.
SHIFT MODIF (F4) when <Offset:> is highlighted. To add, subtract,
multiply and divide values.
4. COGO Intersection Input, Input page
The procedure for the third and fourth known point and the offset is
identical to the procedure for the first and second known point.
Repeat steps 2. and 3.
GPS1200
Refer to
chapter
37.12
37.13
837