Working Example - Leica GPS1200 Series Technical Reference Manual

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Requirements

Survey Cross Section

Working Example

Application:

Working technique:

A real-time reference is running.

For the rover: <R-Time Mode: Rover> in CONFIGURE Real-Time Mode.

A codelist containing the codes TB1, BB1, BB2, EB1, CL, EB2, BB3, BB4 and TB2 has

been created in LGO and loaded onto the receiver.

Surveying a road, taking the same cross sections at particular

Real-time kinematic.

The points of each cross section are to be picked up.

Codes are assigned automatically. The codes are shown in the

Each new cross section is started at the same end as where the

previous cross section finished.

a) Top of bank 1, TB1

b) Bottom of bank 1, BB1

c) Bottom of bank 2, BB2

d) Edge of bitumen 1, EB1

e) Center line, CL

f) Edge of bitumen 2, EB2

g) Bottom of bank 3, BB3

h) Bottom of bank 4, BB4

i) Top of bank 2, TB2

Show Quick Links

Table of Contents