Stakeout
43.3
Access
STAKEOUT
Configuration,
General page
Configuring Stakeout
Select Main Menu: Programs...\Stakeout. In STAKEOUT Stakeout Begin press CONF
(F2) to access STAKEOUT Configuration.
OR
Press PROG. Highlight Stakeout. CONT (F1). In STAKEOUT Stakeout Begin press
CONF (F2) to access STAKEOUT Configuration.
OR
Press SHIFT CONF (F2) in STAKEOUT XX Stakeout.
This screen consists of the General page, the Checks page, the Heights page and the
Logfile page. The explanations for the softkeys given below are valid for all pages, unless
otherwise stated.
GPS1200
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
DMASK (F3)
To edit the display mask currently being
displayed in this field. Accesses CONFIGURE
Define Display Mask n. Available for
<Display Mask:> being highlighted on
General page. Refer to "19.2 Display
Settings".
PAGE (F6)
To change to another page on this screen.
1116