Leica GPS1200 Series Technical Reference Manual page 776

COGO
Field Option
Output
<Config Set:> Choicelist
<Antenna:> Choicelist
Next step
CONT (F1) accepts changes and accesses COGO COGO Menu.
GPS1200
Description
Codes have already been stored in the selected
<Job:>. If codes had been copied from a System
RAM codelist, then the name of the codelist is
displayed. If codes have not been copied from a
System RAM codelist but typed in, then the name of
the active job is displayed.
The active configuration set. All configuration sets
from Main Menu: Manage...\Configuration Sets
can be selected.
The antenna currently defined to be used in the
selected configuration set. All antennas from Main
Menu: Manage...\Antennas can be selected.
776