Volume Calculations
48.4
48.4.1
Description
Access
VOLUMES
Surface Points, Survey
page
Calculating Volumes
Survey Points
To measure points to a new surface or a surface existing in the active job. If no surfaces
currently exist in the active job, the user have to create a New Surface first in VOLUMES
Choose Task & Surface before measuring points to this New Surface. The menu items
Triangulate Surface and Compute Volume within the VOLUMES Volumes & Surfaces
Menu are marked grey if no surface exists in the active job.
Refer to "48.2 Accessing Volumes Calculations" to access VOLUMES Surface Points.
The pages shown are those from a typical configuration set. An additional page is available
when a user defined display mask is used.
GPS1200
OCUPY (F1)
To start measuring the surface point.
(F1) changes to STOP.
STOP (F1)
To end measuring the surface point. When
<Auto STOP: Yes> in CONFIGURE Point
Occupation Settings, recording of positions
ends automatically as defined by the stop
criteria. The position mode icon changes to the
moving icon. (F1) changes to STORE.
1298