Wake-Up; Overview - Leica GPS1200 Series Technical Reference Manual

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Wake-Up

Wake-up sessions are static point occupations

for which the receiver is preprogrammed with a start time and a duration.

where the receiver turns itself on at the preprogrammed start time and the point occupa-

tion begins.

where the receiver stops point occupation and stores the point after the preprogrammed

Up to twenty wake-up sessions can be configured which are totally independent of each

A CompactFlash card must be inserted when the receiver wakes up. If no CompactFlash

card is fitted or it is damaged, not formatted or full then the session will not be executed.

The PIN code, if activated in CONFIGURE Start Up & Power Down, PIN Code page, is not

checked if a wake-up session starts.

Select Main Menu: Programs...\Wake-Up.

Press PROG. Highlight Wake-Up. CONT (F1). Refer to "36.2 Accessing the Application

Programs Menu" for information on the PROG key.

Press a hot key configured to access the screen WAKE-UP Wake-Up Sessions. Refer

to "6.1 Hot Keys" for information on hot keys.

Show Quick Links

Table of Contents