Leica GPS1200 Series Technical Reference Manual page 549

Config...\Interfaces... - General
Field Option
<Time Guard:> User input
<Notify Msg:> None, Binary or
ASCII
<Description:> User input
Next step
IF port and device for a
notification message
are not to be configured
are to be configured
Description
If two or more events take place during the time
defined in s, the first event will be recorded. Enter 0 to
accept all events. The shortest recording time is
0.05 s.
Activates the output of a notification message with
each event input. Refer to "Appendix G Event Input
Notify Message Format" for information on the
message format.
Records up to four lines of data with the event record.
This is particularly useful if two event input ports are
used at the same time in order to differentiate
between the two event records.
THEN
CONT (F1) closes the screen and returns to the screen from
where CONFIGURE Event Input was accessed.
NPORT (F4). Refer to "22.16 Remote".
GPS1200 549