MapView Interactive Display Feature
32.5.2
Description
Select a point using the
softkeys step-by-step
Selecting Points, Lines and Areas
Selecting a point, line or area in the map mode of MapView is possible using both the
softkeys and the touch screen. The functionality of all screens and field are similar for the
selecting of a point, line or area. The step-by-step instructions for selecting a point using the
softkeys can be applied for lines and areas.
Step
Description
1.
Refer to "32.5.1 MapView in Map Mode" to access
MANAGE Data: Job Name, Map page.
If no point field is highlighted on the previous page when
the Map page is accessed, then any point that is selected
will be assigned to the first point field on the previous page,
the second point to the second point field, etc.
If a point field is highlighted when the Map page is
accessed then the point selected will be assigned to that
field.
2.
FOCUS (F2) to activate the focus tool. The focus tool is
made up of a square placed at the centre of dashed cross-
hairs. The focus tool always starts at the centre of the
screen area.
GPS1200
726
Display