Reference Plane; Overview - Leica GPS1200 Series Technical Reference Manual

Reference Plane

42
42.1
Description
Reference plane tasks
Activating the applica-
tion program
Properties of measured
points
Reference Plane

Overview

The Reference Plane application program can be used to measure points relative to a refer-
ence plane.
The Reference Plane application program can be used for the following tasks:
• Measuring points to calculate and store the perpendicular distance to the plane.
• Viewing and storing the instrument and/or local coordinates of the measured points.
• Viewing and storing the height difference from the measured points to the plane.
Planes can only be computed with grid coordinates.
The Reference Plane application program must be activated via a licence key. Refer to "30
Tools...\Licence Keys" for information on how to activate the application program.
The properties stored with measured points are:
• Class: Either MEAS or NAV depending on the position status when the point was occu-
pied.
• Sub class: GPS Fixed, GPS Code Only, GNSS Fixed or GNSS Code Only
• Source: Ref Plane (Meas)
• Instrument source: GPS
GPS1200 1088