Configuring Offset Points - Leica GPS1200 Series Technical Reference Manual

Survey - Auto Points
45.4.2
Requirements
Access step-by-step
SURVEY
Auto Points - Offset,
General page

Configuring Offset Points

<Store: DBX(Pts&Codes)> in SURVEY Configuration, Auto Points page.
Step Description
1. Refer to "44.1 Accessing Survey" to access SURVEY Survey: Job Name.
2. PAGE (F6) until the Auto page is active.
3. OFST1 (F4) or OFST2 (F5) to access SURVEY Auto Points - Offset.
GPS1200
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
OFST2 (F2) and OFST1 (F2)
To switch between configuring offset point type
one and two.
PAGE (F6)
To change to another page on this screen.
1208