Leica GPS1200 Series Technical Reference Manual page 399

Config...\Survey Settings...
Next step
IF parameters for
<Auto STOP:>
are not to be config-
ured
are to be configured
are to be configured
AND
-
<R-Time Mode: None>
<R-Time Mode: Rover>
GPS1200
THEN
CONT (F1) closes the screen and
returns to the screen from where
CONFIGURE Point Occupation
Settings was accessed.
PARAM (F3) changes to
CONFIGURE Post-Process Stop
Criteria. Refer to paragraph
"CONFIGURE Post-Process Stop
Criteria".
PARAM (F3) changes to
CONFIGURE Real-Time Stop
Criteria. Refer to paragraph
"CONFIGURE Real-Time Stop
Criteria".
399