Export Job - Leica GPS1200 Series Technical Reference Manual

22.6
Description
Access
CONFIGURE
Export Job Interface
Config...\Interfaces... - General

Export Job

The Export Job interface allows data from a job to be exported from the receiver to an instru-
ment such as Leica TPS400/700. Refer to "16.4 Exporting Data from a Job to another
Device" for information on how to export data via RS232.
The settings on this screen define the port and the device to which the data should be
exported.
Select Main Menu: Config...\Interfaces.... Highlight Export Job. EDIT (F3).
OR
Select Main Menu: Convert...\Export Data from Job. Set <Export To: RS232>. IFACE
(F5).
The availability of the fields depend on the setting for <Device:>.
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
GET (F4)
Available for <Device: Leica TPS400/700>.
To check which jobs are available on the
TPS400/700. The job numbers can then be
selected in <Job Number:>.
DEVCE (F5)
To create, select, edit or delete a device. Refer
to "23.2 Accessing CONFIGURE Devices /
CONFIGURE GPRS Internet Devices".
GPS1200 521