DET C SYS
Configuration,
Residuals page
Determine Coordinate System - General
Field
Option
<Default
Orthometric or
Height Mode:>
Ellipsoidal
<Default
Pos & Height, Pos
Match:>
Only, Height Only
or <None>
Next step
PAGE (F6) changes to the Residuals page. Refer to paragraph "DET C SYS Configuration,
Residuals page".
Description of fields
Field
Option
<Easting:>
User input
<Northing:>
User input
<Height:>
User input
<Default
Residual
Distbtn:>
None
Description
The default height type to be used when determining
the coordinate system.
Options available depend on the choice made for
<Default Transformation:>. Point parameters to be
matched between points in both datums.
Description
The limit above which Easting residuals will be
flagged as possible outliers.
The limit above which Northing residuals will be
flagged as possible outliers.
The limit above which Height residuals will be flagged
as possible outliers.
The method by which the residuals of the control
points will be distributed throughout the transforma-
tion area.
No distribution is made. Residuals remain with their
associated points.
GPS1200
935