Leica GPS1200 Series Technical Reference Manual page 1303

VOLUMES
Boundary Definition,
Points page
Volume Calculations
Field Option
<Last Pt ID:> Output
<Last Pt Date:> Output
<Last Pt Time:> Output
Next step
CONT (F1) continues to VOLUMES Boundary Definition.
Description
ID of the last measured point of the chosen surface.
Date of the last measured point of the chosen surface.
Time of the last measured point of the chosen surface.
CALC (F1)
To start calculating the triangulation and to
access to the VOLUMES Triangulation
Results.
ADD 1 (F2)
To add points from the active job to the surface.
UP (F3)
To move the focused point one step up within
the boundary definition.
DOWN (F4)
To move the focused point one step down
within the boundary definition.
MORE (F5)
To display information about the code group,
the code type, the code description and the
quick codes if available.
PAGE (F6)
To change to another page on this screen.
GPS1200 1303