Editing A Configuration Set - Leica GPS1200 Series Technical Reference Manual

14.4
Description
Access step-by-step
with using configura-
tion set wizard
Access without using
the configuration set
wizard
Manage...\Configuration Sets

Editing a Configuration Set

There are two possibilities to edit a configuration set.
Using the configuration set wizard to be lead through the steps.
OR
Outside of the configuration set wizard. Each screen can be accessed separately
without being guided through the steps.
Step Description
1. Refer to "14.2 Accessing Configuration Set Management" to access MANAGE
Configuration Sets.
2. In MANAGE Configuration Sets highlight a configuration set to be edited.
3. EDIT (F3) to access CONFIGURE Wizard Mode. This starts the sequential config-
uration set wizard.
4. All following steps are identical with the creation of a new configuration set.
Refer to "14.3.1 Initial Steps". Follow the instructions in paragraph "Configuration
step-by-step" from step 6. onwards.
The currently active configuration set can be edited. Choose one of the following options and
access the required screens to edit the configuration set.
Select Main Menu: Config.... Refer to "7 Main Menu".
OR
From inside an application program press USER and then CONF (F2).
GPS1200 327