Gprs / Internet Devices - Leica GPS1200 Series Technical Reference Manual

24.7
Description
Configure Internet
connection step-by-
step
Config...\Interfaces... - Controlling Devices

GPRS / Internet Devices

GPRS / Internet devices can be used to access the Internet from a GPS1200 receiver.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2. In CONFIGURE Interfaces highlight the Internet interface which has
a GPRS / Internet device attached.
3. CTRL (F4) to access CONFIGURE GPRS/Internet Connection.
4. CONFIGURE GPRS/Internet Connection
<Device:> The type of GPRS / Internet device highlighted when
CONFIGURE GPRS/Internet Connection was accessed.
<Bluetooth:> GPS1200 receivers detect automatically if the
attached devices is bluetooth capable. Some devices ask for the
identification number of the Bluetooth. The field is unavailable for
RX1250 with SmartAntenna.
<ID Address:> Available for <Bluetooth: Yes>. The ID address of
the Bluetooth device to be used. Refer to the device's user manual
for information about the ID address.
GPS1200
Refer to
chapter
22.11
601