Staking Out In Polar Mode - Leica GPS1200 Series Technical Reference Manual

Stakeout
43.4.3
Description
Diagram
Access
STAKEOUT
Polar Stakeout,
Stake page

Staking Out in Polar Mode

The stakeout elements are a direction from the orientation reference, a horizontal distance
and a cut/fill. The value is calculated from the current position to the point to be staked.
This diagram shows an example for stake out in polar mode with <Orientate: To North>.
P0
GPS12_53
<Stake Mode: Polar> is configured in STAKEOUT Configuration, General page. Refer to
"43.3 Configuring Stakeout".
Refer to "43.2 Accessing Stakeout" to access STAKEOUT Polar Stakeout.
The pages shown are those from a typical configuration set. An additional page is available
when a user defined display mask is used.
The keys are identical with those in STAKEOUT Orthogonal Stakeout, Stake page. Refer
to "43.4.2 Staking Out in Orthogonal Mode" for information on the keys.
GPS1200
P1
d2
P0 Current position
P1 Point to be staked
d1
d1
d2
α
<DIST:>
<CUT:> or <FILL:>
<DIRC:>
1136