Staking Out A Dtm - Leica GPS1200 Series Technical Reference Manual

Stakeout
43.4.4
Description
Diagram
Stake out a DTM step-
by-step

Staking Out a DTM

With the Stakeout application program a Digital Terrain Model can be staked. The heights of
the current positions are compared against those of a selected DTM job. The height differ-
ences are calculated and displayed.
Staking a DTM may be used for
• staking out where the DTM represents the surface to be staked.
• quality control purposes where the DTM represents the final project surface.
DTM jobs are created in LGO. DTM jobs are stored in the \DBX directory on the active
memory device.
GPS12_108
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
GPS1200
d2
P1
d1
P1 Point to be staked
d1 Antenna height
d2 <CUT:> or <FILL:>
1140