Importing Data In Gsi Format - Leica GPS1200 Series Technical Reference Manual

Convert...\Import Data to Job
17.4
Requirements
Access
Import data step-by-
step

Importing Data in GSI Format

At least one ASCII file in GSI format with the file extension *.gsi is stored in the \GSI directory
of the CompactFlash card.
Refer to "17.2 Accessing the Data Import Functionality" to access IMPORT Import
ASCII/GSI Data to Job.
Step Description
1. IMPORT Import ASCII/GSI Data to Job
<Import: GSI Data>
<From File:> All files with extension *.gsi in the \GSI directory on the Compact-
Flash card can be selected.
<To Job:> Choosing a job as destination for import makes this job the active job.
All jobs from Main Menu: Manage...\Jobs can be selected.
CONF (F2) accesses IMPORT Define GSI Import. For <Switch WI81/WI82:
Yes> all WI 81 data, normally Easting, is imported as Northing and all WI 82 data,
normally Northing, is imported as Easting. This coordinate switch is necessary for
"left handed" coordinate systems.
2. SHIFT HTS (F2) to access IMPORT Define Ht Type & Easting Import.
3. IMPORT Define Ht Type & Easting Import
<Import as:> The height type for the imported data.
<Easting:> The Easting can be imported as written in the *.gsi file or it can be
multiplied by -1. This is required by some coordinate systems.
GPS1200 352