Config...\Interfaces... - General
CONFIGURE
Send GGA NMEA
GPS1200
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
COORD (F2)
Available for <GGA Position: From Job> and
<GGA Position: LAST/HERE Posn>. To view
other coordinate types. Local coordinates are
available when a local coordinate system is
active.
LAST (F3)
Available for <GGA Position: LAST/HERE
Posn>. To use the same coordinates in the
GGA message as when the receiver was last
used in a reference network application.
This is possible when position coordinates
from a previous reference network application
are still stored in the System RAM.
HERE (F4)
Available for <GGA Position: LAST/HERE
Posn>. To use the coordinates of the current
navigation position in the GGA message.
SHIFT ELL H (F2) and SHIFT ORTH (F2)
To change between the ellipsoidal and the
orthometric height. Available for local coordi-
nates.
498