Leica GPS1200 Series Technical Reference Manual page 476

Config...\Interfaces... - General
CONFIGURE
Real-Time Data Rates
Next step
Step Description
1. CONT (F1) closes the screen and returns to CONFIGURE Real-Time Mode.
2. RATES (F3). Refer to paragraph "CONFIGURE Real-Time Data Rates".
Description
For all real-time data formats, parts of the message can be output at different rates.
The settings on this screen define the output rates for the various parts of the selected real-
time data format. The available fields on this screen depend on the selected setting for <R-
Time Data:> in CONFIGURE Real-Time Mode.
Description of fields
Field Option
<Data:> From 0.1s to 60.0s Rates for the transmission of raw observations. The
<Coords:> From 10s to 120s
<Messages:> Choicelist
<Info:> From 10s to 120s
GPS1200
Description
default settings are suitable for standard applications.
They can be changed for special applications. A
check is performed for permissible combinations.
Rate for the transmission of reference coordinates.
Available for <RTCM Version: 2.3> in CONFIGURE
Additional Reference Options, General page. The
messages sent within the coordinate message.
Rate for the transmission of reference station infor-
mation such as point ID.
476