Leica GPS1200 Series Technical Reference Manual page 1157

SURVEY
Survey: Job Name,
Survey page
Survey - General
The fields shown are those from a typical configuration set for static or post-processed kine-
matic operations. The screen described consists of the Survey page and the Map page. The
explanations for the softkeys given below are valid for the Survey page. Refer to "32
MapView Interactive Display Feature" for information on the keys on the Map page.
The fields and functionality of this screen vary slightly when accessed from other application
programs where individual point measurements are needed.
OCUPY (F1)
To start logging of static observations. The
position mode icon changes to the static icon.
(F1) changes to STOP.
STOP (F1)
To end logging of static observations when
enough data is collected. When <Auto STOP:
Yes> in CONFIGURE Point Occupation
Settings, logging of static observations ends
automatically as defined by the stop criteria.
The position mode icon changes to the moving
icon. (F1) changes to STORE.
GPS1200 1157