Leica GPS1200 Series Technical Reference Manual page 1241

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Survey - Hidden Points

Select a point stored in the job.

SURVY (F5) when <Point B:> is highlighted. To manually occupy the

first known point for the calculation of the hidden point.

To manually type in coordinates for the known point open the

choicelist when <Point B:> is highlighted. Press NEW (F2) to create

a new point.

HIDDEN PT Hidden Point Measurement

<Chainage:> The chainage from one known point along the line

between the two known points. Looking from the point selected in

<Chainage From:>, a positive chainage is towards the second

known point. A negative chainage is into the opposite direction of the

second known point.

Type in a distance and select its direction. When a hidden point

measurement device is attached to the receiver to measure the

distance, the value is automatically transferred.

DIST (F2) available for Leica Disto

when a distance field is highlighted. To measure the distance without

pressing DIST on the Disto.

POS? (F4) to determine chainage and offset of the current position

relative to the line between the two known points. The values are

displayed in <Chainage:> and <Offset:>. The point from where the

chainage has been measured is selected in <Chainage From:>.

and Leica Disto

Show Quick Links

Table of Contents