Stakeout
Coding of staked points
Properties of staked
points
Averaging of staked
points
If activated, the height of the points to be staked can be edited in the field.
Codes can be attached to staked points, lines and areas. Refer to "11 Coding" for information
on coding. The behaviour of the coding functionality depends on the definition of a display
mask with input fields for coding and attributes.
It may happen that the codes and/or attributes of the staked point and the point to be staked
do not match. In this case, a screen opens where they can be corrected. Refer to "11.5 Code
and Attribute Mismatch" for information on solving a code and/or attribute mismatch.
The properties stored with staked points are:
•
Class: Either MEAS or NAV depending on the position status when the staked point was
occupied.
•
Sub class: GPS Fixed, GPS Code Only, GNSS Fixed or GNSS Code Only
•
Source: Stakeout
•
Instrument source: GPS
The principles for averaging are identical to those of the Survey application program. Refer
to "9.3.4 Mean Page" for information on averaging.
GPS1200
1112