Leica GPS1200 Series Technical Reference Manual page 1226

Survey - Hidden Points
Step Description
<Point ID:> The identifier for the hidden point. The configured point
ID template is used. The ID can be changed.
Type in a point ID.
SHIFT INDIV (F5) for an individual point ID independent of the ID
template. SHIFT RUN (F5) changes back to the next ID from the
configured ID template.
NEXT (F5) to store the hidden point and to return to HIDDEN PT
Hidden Point Measurement. Another hidden point can be meas-
ured.
7. PAGE (F6) changes to Code page.
8. HIDDEN PT Hidden Point Result, Code page
<Code:>/<Point Code:> The thematical code. All codes of the job
can be selected.
<Attribute n:> The attributes for the thematical code. The behaviour
of the fields depend on their definition in the codelist.
Type in a code if required.
9. PAGE (F6) changes to the Plot page.
10. HIDDEN PT Hidden Point Result, Plot page
Measured distances are indicated by solid arrows.
Bearings are indicated by half solid and half dashed arrows.
GPS1200 1226
Refer to
chapter
19.1
11
32.6