Leica GPS1200 Series Technical Reference Manual page 1128

Stakeout GPS1200
NEAR (F2)
To search <
nearest to the current position when the key is
pressed. The point is selected as the point to
be staked and is displayed in the first field on
the screen. After staking and storing the
nearest point, the next point suggested for
staking out is the one which was suggested
before the key was pressed.
Available when OCUPY (F1) is displayed.
REVRS (F3)
To reverse the graphical display top to bottom.
A reversed graphical display can be used when
the point to be staked lies behind the current
position.
SURVY (F5)
To survey additional points which may be
needed during staking out. To return to
Stakeout application program, press SHIFT
QUIT (F6) or ESC.
Available for OCUPY (F1) being displayed.
PAGE (F6)
To change to another page on this screen.
SHIFT CONF (F2)
To configure the Stakeout application program.
Available for OCUPY (F1) being displayed.
Refer to "43.3 Configuring Stakeout".
Stakeout
Job:> for the point
1128