Working Example - Leica GPS1200 Series Technical Reference Manual

41.6.2
Description
Diagram
Requirements
Reference Line

Working Example

Application:
Reference line/arc:
Working technique:
d1
P1
TPS12_132
• The reference arc is already defined and saved in a job.
• <Write Logfile: Yes> in REFLINE Configuration, Logfile page.
• A real-time reference is running.
• For the rover: <R-Time Mode: Rover> in CONFIGURE Real-Time Mode.
A curb is to be defined using offsets from the centreline of a road
that is being built.
The defined centre line of the curve is used as a reference arc.
Real-time kinematic.
P0
d2
P0 Start point
P1 End point
d1
d2
GPS1200
<Along Arc:>
<Stake Offset:>
1071