Leica GPS1200 Series Technical Reference Manual page 909

COGO
Step Description
<Divide By: Defined Line>
<Using: Parallel Line>
<Point A:> and <Point B:> Select the first and the second point of the line which
is used as the reference for the new border. The new border will run parallel to this
line.
<Shift: Through Point>
<Through Point: 100>
15. CALC (F1) to access COGO Results of Area Division.
16. COGO Results of Area Division, Result page
The size of the two new sub areas is displayed,
17. CONT (F1) to access COGO Area Division Results.
18. COGO Area Division Results, Result1 page
<Point ID:> The identifier for the first COGO point depending on the point ID
template configured for <Survey Pts:> in CONFIGURE ID Templates. The point
ID can be changed.
<Ortho Ht:> or <Local Ell Ht:> are input fields. The height of the first point used
in the COGO calculation is suggested. A height value to be stored with the calcu-
lated point can be typed in.
The calculated coordinates are displayed.
Type in a point ID.
COORD (F2) views other coordinate types.
RSLT1 (F3) and RSLT2 (F3) to view the first and second result.
GPS1200 909