Table of Contents
Advertisement
38.6
38.6.1
Description
COGO
COGO Calculation - Intersections Method
Intersection with Bearing - Bearing
The COGO intersection calculation bearing - bearing calculates the intersection point of two
lines. A line is defined by a point and a direction.
Elements that must be known are
•
the coordinates of two points.
•
the direction from these known points to the COGO point.
•
offsets if required and configured.
The coordinates of the known points
•
may be taken from the active job.
•
may be manually occupied during the COGO calculation.
•
may be entered.
Points with full coordinate triplets and position only points can be used. Position only is calcu-
lated, height can be typed in.
GPS1200+
835
Advertisement
Table of Contents
