Leica GPS1200 Series Technical Reference Manual page 403

Config...\Survey Settings...
Field Option
<Position Output
Update:>
<No. of Posi- User input
tions:>
Next step
Step Description
1. CONT (F1) returns to CONFIGURE Point Occupation Settings.
2. CONT (F1) returns to the screen from where CONFIGURE Point Occupation
Settings was accessed.
Description
Displays the value for <Position and Screen
Update:> as configured in CONFIGURE Display
Settings.
Sets the number the positions which must be
observed before the receiver stops measuring.
Counting the number of positions starts when
OCUPY (F1) is pressed.
GPS1200 403