Configuring Cogo - Leica GPS1200 Series Technical Reference Manual

37.3
Access
COGO
Configuration,
Parameters page
COGO

Configuring COGO

Select Main Menu: Programs...\COGO. In COGO COGO Begin press CONF (F2) to
access COGO Configuration.
OR
Press PROG. Highlight COGO. CONT (F1). In COGO COGO Begin press CONF (F2) to
access COGO Configuration.
OR
Press SHIFT CONF (F2) in COGO COGO Menu. Refer to "37.2 Accessing COGO".
OR
Press SHIFT CONF (F2) in COGO XX.
This screen consists of the Parameters page, Residuals page and the Logfile page. The
explanations for the softkeys given below are valid for all pages.
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
PAGE (F6)
To change to another page on this screen.
SHIFT ABOUT (F5)
To display information about the program
name, the version number, the date of the
version, the copyright and the article number.
GPS1200 783