41.4.3
Description
Access step-by-step
REFLINE
Choose Task & Refer-
ence Line,
Reference page
Reference Line
Selecting a Reference Line/Arc from the Job
New reference lines/arcs can be created, existing reference lines/arcs can be edited and
previously entered reference lines/arcs can be selected from the <Control Job:>.
Step
Description
1.
Refer to "41.2 Accessing Reference Line" to access REFLINE Reference
Line/Arc Begin.
2.
CONT (F1) to access REFLINE Choose Task & Reference Line, Reference
page.
3.
REFLINE Choose Task & Reference Line, Reference page
Select <Ref to Use: Select from Job>.
This screen contains the Reference page and the Map page. The explanations for the
softkeys and the fields are as for manually entering a reference line. The <Method:> field is
not available and all line definition fields are outputs, all other differences are described
below.
The fields shown depend on the options chosen for <Task:> and <Method:> in REFLINE
New Reference XX. Refer to paragraph "Create reference line/arc step-by-step".
Description of fields
Field
Option
<Ref Line:>
Choicelist
Description
Available for <Task: XX Line>. The reference line to
be used. Accesses REFLINE Manage Reference
Lines.
GPS1200
1031