Leica GPS1200 Series Technical Reference Manual page 1180

Survey - General
Step Description
<Time at Point:> The time in hours, minutes and seconds from when
the point is occupied until point occupation is stopped.
6. When <Auto STOP: No> in CONFIGURE Point Occupation
Settings, STOP (F1) when enough data is collected.
7. When <Auto STORE: No> in CONFIGURE Point Occupation
Settings, STORE (F1) to store the point information.
<Time at Point:> changes to <Start Time:> displaying the current
local time with the seconds rounded to 00.
8. Are more points to be surveyed?
• If yes, continue with step 9.
• If no, continue with step 11.
9. Move to the next point.
10. Repeat steps 3. to 8.
11. SHIFT QUIT (F6) to return to from where SURVEY Survey: Job
Name was accessed.
GPS1200 1180
Refer to
chapter
19.6
19.6