Line Calculation - Segmentation - Leica GPS1200 Series Technical Reference Manual

COGO
37.7.3
Description
Diagram

Line Calculation - Segmentation

The COGO line calculation segmentation calculates the coordinates of new points on a line.
Elements that must be known are
• coordinates of the start and the end point of the line
OR
• a bearing and distance from a known point that define the line
AND EITHER
• the number of segments dividing the line
OR
• a segment length for the line.
The coordinates of the known points
• may be taken from the active job.
• may be measured during the COGO calculation.
• may be entered.
d d
P0
GPS12_144
GPS1200
Line divided by <Method: No. of Segments>
d d
P1
P0 <Start Point:>
P1 <End Point:>
d Equally spaced segments result from
dividing a line by a certain number of points.
852