Configuring Determine Coordinate System - One Point Localisation - Leica GPS1200 Series Technical Reference Manual

38.3.2
Description
Access step-by-step
DET C SYS
Configuration,
Method page
Determine Coordinate System - General

Configuring Determine Coordinate System - One Point Localisation

The configuration of DET C SYS, one point localisation method, allows options to be set
which are used as the default options within the Determine Coordinate System application
program when using the one point localisation method. These settings are stored within the
active configuration set.
Step Description
1. Refer to "38.2 Accessing Determine Coordinate System" to access DET C SYS
Determine Coord System Begin.
2. CONF (F2) to access DET C SYS Configuration, Method page.
3. Select <Default Method: One Pt Localistn>.
This screen consists of the Method page, the Onestep page, the Twostep page and the
Classic 3D page. The explanations for the softkeys given below are valid for all pages.
GPS1200 939