Measuring To A Reference Line/Arc; Measure Points - Leica GPS1200 Series Technical Reference Manual

41.5
41.5.1
Description
Access
Measure to line - hori-
zontal measurements
Reference Line

Measuring to a Reference Line/Arc

Measure Points

The horizontal and vertical position and the chainage of a manually occupied point can be
calculated relative to the defined reference line/arc.
Select <Task: Measure to XX> in REFLINE Choose Task & Reference Line, Refer-
ence page and press CONT (F1) to access REFLINE Measure Points. Refer to "41.4.4
Defining Reference Line/Arc Offsets" to access REFLINE Choose Task & Reference
Line.
OR
Press SURVY (F5) in REFLINE XX Stakeout to access REFLINE Measure Points.
Refer to "41.6 Staking to a Reference Line/Arc" to access REFLINE XX Stakeout.
d2
P0
GPS12_115
P1
P0 Start point
d3
P1 End point
d5
P3
P2 Measured point
P3 Reference point
d1
P2
d1
d4
d2
d3
d4
d5
GPS1200
Δ
< Offset:>
Δ
< Line:>
Δ
< Line-End:>
<Check Dist 1:>
<Check Dist 2:>
1045