Leica GPS1200 Series Technical Reference Manual page 332

Manage...\Antennas
Next step
IF an antenna THEN
is to be selected highlight the desired antenna.
CONT (F1) closes the screen and returns to the screen from where
MANAGE Antennas was accessed.
is to be created highlight the antenna with offset characteristics similar to those
required by the new antenna.
NEW (F2) creates a new antenna. Refer to "15.3 Creating a New
Antenna".
is to be edited highlight the desired antenna.
EDIT (F3). Refer to "15.4 Editing an Antenna".
GPS1200
SHIFT DEFLT (F5)
To recall previously deleted default antennas
and to reset default antennas to the default
settings. User defined antennas are not
affected.
332