STAKEOUT
Configuration,
Heights page
Stakeout
Field
Option
<Height
User input
Limit:>
<Beep near
Yes or No
Pt:>
<Dist from Pt:> User input
Next step
PAGE (F6) changes to the Heights page. Refer to paragraph "STAKEOUT Configuration,
Heights page".
Description of fields
Field
Option
<Height
User input
Offset:>
<Edit Height:> Yes
Description
Available for <Height Check: Yes>. Sets the
maximum vertical difference accepted in the height
check.
The receiver beeps when the horizontal radial
distance from the current position to the point to be
staked is equal to or less than defined in <Dist from
Pt:>.
Available for <Beep near Pt: Yes>. The horizontal
radial distance from the current position to the point to
be staked when a beep should be heard.
Description
Allows a constant height offset to be applied to the
height of the points or DTM being staked.
The field <D Ht:> for the design height is displayed in
STAKEOUT Orthogonal Stakeout, Stake page and
STAKEOUT Polar Stakeout, Stake page. The
design height is the height of the point to be staked.
The value for <D Ht:> can be changed.
GPS1200
1121