Leica GPS1200 Series Technical Reference Manual page 473

Config...\Interfaces... - General
Description of fields
Field Option
<Ref Stn ID:> User input
From 0 to 31
From 0 to 1023
From 0 to 4095
<Time Yes or No
Slicing:>
<Used Ref 2, 3 or 4
Stations:>
Description
An identification for a reference station. It is converted
into a compact format and sent out with real-time data
in all real-time data formats. It is different from the
point ID of the reference station.
An ID of the reference station is required if working
with several reference stations in time slicing mode
on the same frequency. In this case, the ID of the
reference station from which data is to be accepted
must typed in at the rover.
The allowed minimum and maximum values vary.
For <R-Time Data: Leica> and <R-Time Data:
CMR/CMR+> in CONFIGURE Real-Time Mode.
For <RTCM Version: 1.x> and <RTCM Version:
2.x>.
For <R-Time Data: RTCM v3> in CONFIGURE
Real-Time Mode.
The possibility to send real-time messages delayed.
This is required when real-time messages from
different reference stations are sent on the same
radio channel. Time slicing works for all device types.
Available for <Time Slicing: Yes>.
The number of reference stations in use from where
real-time messages are sent.
GPS1200 473