Leica GPS1200 Series Technical Reference Manual page 605

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Config...\Interfaces... - Controlling Devices

<IP Address:> The IP address of the selected <Server:> as config-

ured in CONFIGURE Server to Connect.

For <User: Server>: Output of the IP address associated with the

NET port as configured in CONFIGURE Set NET Parameter

<TCP/IP Port:> The TCP/IP port number of the selected <Server:>

as configured in CONFIGURE Server to Connect.

<Auto CONEC:> Available for <User: Client>.

For <R-Time Mode: Rover> in CONFIGURE Real-Time Mode

Allows for automatic connection between the rover and the Internet

when a point is occupied during a survey. Ending the point occupa-

tion also ends the Internet connection.

For <R-Time Mode: Reference> in CONFIGURE Real-Time Mode

Automatically tries to establish a connection to the Internet for data

streaming. After the streaming was interrupted for some reason,

SHIFT CONEC (F4) in the Survey screen.

PAGE (F6) to access CONFIGURE Set NET Port, Ranges page

CONFIGURE Set NET Port, Ranges page

For <User: Server> in CONFIGURE Set NET Port, General page,

the fields are input fields. The fields <Range X From:> and <Range

X To:> can be used to prevent a user with an IP address outside the

defined ranges from accessing the receiver.

Enter the IP address ranges.

CLEAR (F5) returns the fields back to their default values.

Show Quick Links

Table of Contents