Leica GPS1200 Series Technical Reference Manual page 1133

Stakeout
Step Description
1. Set up all equipment as for a real-time operation.
2. Start the Stakeout application program.
3. STAKEOUT Stakeout Begin
Check the settings.
4. CONF (F2)
5. STAKEOUT Configuration, General page
<Stake Mode: Orthogonal>
This step-by-step instruction uses typical settings in all other fields on
all pages in STAKEOUT Configuration.
6. CONT (F1)
7. CONT (F1) to access STAKEOUT Orthogonal Stakeout.
8. STAKEOUT Orthogonal Stakeout, Stake page
Check the point ID and the antenna height.
NEAR (F2) to search <Stakeout Job:> for the point nearest to the
current position when the key is pressed.
9. Wait until the ambiguities are solved. This is indicated by the position
status icon.
When working with code only corrections, an ambiguity solution is not
attempted.
10. Orientate to North.
GPS1200
Refer to
chapter
1
43.2
43.2
43.3
43.3
1133