Measuring Points To A Reference Plane - Leica GPS1200 Series Technical Reference Manual

42.5
Measure points to plane
step-by-step
Reference Plane

Measuring Points to a Reference Plane

Step Description
1. Refer to "42.2 Accessing Reference Plane" to access REFPLANE Reference
Plane Begin.
2. CONT (F1) to access REFPLANE Choose Task & Reference Plane.
3. REFPLANE Choose Task & Reference Plane
Select a reference plane. Refer to paragraph "Select a reference plane from the
job step-by-step".
4. CONT (F1) to access REFPLANE Measure Points to Plane, Reference page.
5. REFPLANE Measure Points to Plane, Reference page
<Offset ΔPer d:> The perpendicular distance between current position and
adjusted plane.
<Offset ΔHt:> The vertical distance between current position and adjusted plane.
For <Use As Origin: Plane Coords>
<X Coordinate:>, <Y Coordinate:> and <Z Coordinate:> are displayed.
For <Use As Origin: Instrumnt Coords>
<Easting:>, <Northing:> and <Height:> are displayed.
CMPR (F4) to calculate offsets to previously measured points.
STORE (F1) to store the results for the point currently being displayed.
DONE (F4) to return to REFPLANE Measure Points to Plane, Reference
page.
GPS1200 1107