Stakeout
Field
Option
<CUT:>
Output
<FILL:>
Output
<2D-Diff:>
Output
<3D-Diff:>
Output
Next step
IF the exceeded difference limit
is not to be accepted
is to be accepted
is not to be accepted but cannot be
improved
GPS1200
Description
The negative height difference from the height of the
staked point to the height of the point to be staked. To
move down.
The positive height difference from the height of the
staked point to the height of the point to be staked. To
move up.
Displays the horizontal difference from the staked
point to the point to be staked.
Displays the spatial difference from the staked point
to the point to be staked.
THEN
BACK (F1) to stake the same point again.
STORE (F3) to store the point and to stake out the
next point.
SKIP (F4) to skip staking this point and to stake out
the next point.
1146