Configuration of Devices
Supported digital
cellular phones
Sometimes required:
Default digital cellular phones fitting into a clip-on-housing
•
CDMA MultiTech MTMMC-C (US)
•
CDMA MultiTech MTMMC-C (CAN)
Default digital cellular phones not fitting into a clip-on-housing
These digital cellular phones must be connected with a cable. Refer to "Appendix E Cables"
for information on cables.
•
Siemens M20
•
Siemens S25/S35i
These digital cellular phones can be connected via bluetooth or cable using the implemented
standard device provided for the below mentioned cellular phone manufacturers.
•
Motorola RAZR v3
•
Motorola E1000
•
Nokia 6021
•
Nokia 6230(i)
•
Nokia 6310(i)
•
Nokia 6630
•
Nokia 6822a
•
Nokia N80
GPS1200
•
SIM card. This is the same SIM card as normally used in mobile
phones. The SIM card must be enabled to transmit data. Contact
the service provider to enable the SIM card.
•
Personal Identification Number
•
Registration
•
•
•
•
•
•
•
•
•
•
•
•
Siemens MC75
Siemens TC35
Wavecom M1200 Series
Siemens S55
Siemens S65
Siemens S65v
SonyEricsson K700i
SonyEricsson K750i
SonyEricsson K800i
SonyEricsson P900
SonyEricsson S700i
562