Leica GPS1200 Series Technical Reference Manual page 359

Config...\Survey Settings...
Default ID template
Line0001
No Template Used
Time & Date
Use Code&String
Description
Suggested as ID for lines in default configuration sets. This ID is
automatically incremented.
The last point ID during a survey will be displayed. This ID is auto-
matically incremented if it contains numerical characters. If this ID
is overwritten, the auto increment starts from the new ID. The auto-
matic incrementation can be turned off when editing this ID
template. Refer to "19.1.4 Editing an ID Template".
The current local time and date is the ID.
Allows the line/area ID assigned to a line/area object to be based on
the code related to the line/area.
• If line/area codes are being used then the line/area code is used
as part of the line/area ID.
• If point codes are being used then the point code is used as part
of the line/area ID.
• If attributes/strings are not being used then the numerical part of
the line/area ID automatically increments.
GPS1200 359