Hidden Point - Leica GPS1200 Series Technical Reference Manual

Config...\Interfaces... - General
22.7
Description
Access

Hidden Point

Hidden point measurement devices are used for measuring to points which cannot be
directly measured with GPS, for example house corners or trees. The measurements made
with a hidden point measurement device are directly transferred to the receiver for the calcu-
lation of the coordinates of the hidden point. They can also be entered manually.
The settings on this screen define the port, the device and estimated qualities to be used for
the hidden point interface.
The configuration of hidden point measurements is possible for <R-Time Mode: Rover> and
<R-Time Mode: None> in CONFIGURE Real-Time Mode.
Select Main Menu: Config...\Interfaces.... Highlight Hidden Pt. EDIT (F3).
OR
Press SHIFT CONF (F2) in HIDDEN PT Hidden Point Measurements.
OR
Select Main Menu: Survey. In SURVEY Survey Begin press CONF (F2) to access
SURVEY Configuration. PAGE (F6) until the Hidden Points page is active.
OR
In SURVEY Survey: Job Name press SHIFT CONF (F2) to access SURVEY Configu-
ration. PAGE (F6) until the Hidden Points page is active.
GPS1200 524