41.6
41.6.1
Description
Access
Stake to line - horizontal
measurements
Reference Line
Staking to a Reference Line/Arc
Stakeout Points
Allows for the position of a point to be defined relative to a reference line/arc and then staked.
Select <Task: Stake to XX> in REFLINE Choose Task & Reference Line, Reference
page and press CONT (F1) to access REFLINE Enter Offset Values. Refer to "41.4
Managing Reference Lines/Arcs" to access REFLINE Choose Task & Reference Line.
OR
Press STAKE (F5) in REFLINE Measure Points. Refer to "41.5 Measuring to a Refer-
ence Line/Arc" to access REFLINE Measure Points.
d2
P0
GPS12_119
P1
P3
d1
P0 Start point
P2
P1 End point
P2 Target point
P3 Reference point
d1
d2
GPS1200
<Stake Offset:>
<Along Line:>
1059