MapView Interactive Display Feature
Step
Description
•
If yes, continue with step 5.
•
If no, continue with step 7.
5.
XX Select Line
Point ID The ID of the lines within range of the line selection.
Point Code The code of the lines within range of the point selection.
Select the desired line.
MORE (F5) to display information about the line code, the start time, the end time,
the length and the Open status of the line.
6.
CONT (F1) returns to SURVEY Data: Job Name, Map page.
7.
A message appears in the message line.
•
Line Line Name was opened (If the line was close before).
•
Line Line Name was closed (If the line was open before).
GPS1200
741